MTX Thunder Form JWTJ97C20A-TN, Owner'S Manual, Page: 8 / 12

M T X . C O M
8
Step 24 - Making sure the enclosure is at the far rear of the vehicle with the rear mounting feet
pressed against the tail gate threshold, secure enclosure into place. Attach brackets to mounting
feet on front of enclosure an secure to the sides of the cargo area using a right angle skewdriver as
shown below.
Step 25 - Flip the rear seat back and lock into place against your new enclosure.
These instructions are guidelines only and in no way are intended to replace a professional
installation. As always before screwing or drilling check to make sure you will not damage any wires
or hoses or cause damage to the vehicle.
Warning: Batteries normally produce explosive gases which can cause personal injury. Therefore, do
not allow flames, sparks or lighted substances to come near the battery. When charging or working
near a battery, always shield your face and protect your eyes. Always provide ventilation.