CONGRATULATIONS
...on your purchase of MTX Multi-Purpose Loudspeakers. Your new loudspeakers represent
years of thorough research and development in the most modern techniques of speaker
design and engineering. Using advanced technology and high quality electronics and com-
ponents, MTX loudspeakers assure you of exceptional performance and value.
Your speakers were examined very carefully during and after manufacturing to assure all
quality standards were met or exceeded. If damage as a result of shipping and handling has
occurred, please contact the shipper or your dealer immediately.
Thank you for selecting MTX when you made your audio equipment purchase.
SPECIFICATIONS
MPP4200
Frequency Response
(F3) 105Hz-20kHz
(F6) 90Hz-20kHz
(F10) 85Hz-20kHz
Nominal Impedance
8 Ohms
Power Handling
100W RMS
200W Peak
Sensitivity (2.83v/1m)
88dB
Woofer
Dual 4”
Tweeter
30mm Teteron
Dimension
(H X W X D):
25” X 5 1/4” X 3 3/4”
(4 1/4”D w/bracket)
INTRODUCTION
The MTX MPP Series may be the most comprehensive loudspeaker design ever conceived.
The unparalleled application flexibility afforded by this design gives you the freedom to listen
to music almost anywhere and in just about any possible configuration.
PAINTING
Carefully remove the spring clip on the back of the grille logo and remove the logo. Mask
the baffle area of the speaker cabinet out to the grille mounting groove. Almost any type of
paint can be used but best results will be had using a quick drying enamel or lacquer spray
paint. For best results always follow the paint manufacturers recommendations for proper
application. After painting the cabinet, grille and applicable end caps allow the paint to dry
thoroughly.
NOTES
