CONCRETE MIXER
34
EN
G
ASSEMBLY
1
2
Set on the wheel support axis,
pos. 1 washer 27, then wheel,
pos. 2 and one more washer
27. Insert into axis openings
the splints so that they are
located at the outside of the
washer. Remove splints, using
fl at-nose pliers..
4
3
Connect the support, pos.
3 with the frame, pos. 4 by
means of bolts M8 x 65 and
fi x with M8 nuts. The support
should be installed from the
frame side with 3 openings
(for the CM120 model - from
the spring side).
4
Connect the wheel support
complete with the frame, pos.
4 by means of bolts M8 x 65
and fi x with M8 nuts.
Summary of Contents for CM120
Page 90: ...ДЛЯ ЗАМЕТОК FOR NOTES ЗА БЕЛЕЖКИ PENTRU NOTE ...
Page 91: ...ДЛЯ ЗАМЕТОК FOR NOTES ЗА БЕЛЕЖКИ PENTRU NOTE ...
Page 92: ......
