MTX 350359, User Manual, Page: 2 / 14

SELF LEVELING LASER
2
ENG
Laser Level - a device diodes’ based, that emit a powerful ray of light (laser). It is used to build and control
the horizontal and vertical surfaces, as well as the layout of vertical and horizontal lines. It has the ability to
simultaneously produce five rays in different surfaces and the ray leveling. Designed for use indoors and
outdoors. Suitable for both domestic and professional use. Delivery completeness.
It can be installed on a flat surface or on a tripod MTX 350909.
CORRECT USE
This leveling laser is used for the following work:
• Laying of floor and wall tiles.
• Install wall cabinets.
• Interior finish.
• Finishing work on wood.
• Installation of window frames.
• Installation of racks and shelves.
• Mount a suspended ceiling.
• Lining of walls with wooden panels or with other material.
• Mounting accessories for fixing on a wall: sockets, switches, lights.
• Installation of wall decoration: paintings, photographs, etc.
TECHNICAL DATA
Specification Value
Laser wave length, nm perpendicular rays / vertical ray and horizontal line-635 nm
point (plumb line) 650 nm
Working range, m indoors - up to 10 m, with use of detector - not less than 50 m
Horizontal leveling deviation ± 2.5°
Level of accuracy ± 1 mm/5 m ± 0.5
Right angle deviation 90° ± 1°
Vertical leveling deviation ± 2 mm/3 m ± 2
Power Battery type AA, 3 pcs DC 4.5V (inclusive in delivery)
Power block
(inclusive in delivery) Input – FC 220V/50Hz
output – DC 4.5V
Working temperature - 10 + 45 °С
Weight 1200 gr