7.7.2 Injector – Removal and installation
Preconditions
☑
Engine is stopped and starting disabled.
Special tools, Material, Spare parts
Designation / Use
Part No.
Qty.
Puller
3555890163/00
1
Fuel suction device
F30378207
1
Torque wrench, 20-100 Nm
F30026582
1
Ratchet adapter
F30027340
1
Open-end wrench bit
F30025897
1
Spider patch spanner
F30027425
1
Spider patch spanner
F30027424
1
Double-head box wrench
F30011450
1
Ratchet adapter
F30027340
1
Assembly compound (Kluthe Hakuform 30-15)
X00067260
1
Sealing ring
(→ Spare Parts Catalog)
Sealing ring
(→ Spare Parts Catalog)
WARNING
Fuels are combustible and explosive.
Risk of fire and explosion!
• Avoid open flames, electrical sparks and ignition sources.
• Do not smoke.
• Wear protective clothing, protective gloves, and safety glasses / facial protection.
WARNING
Compressed air gun ejects a jet of pressurized air.
Risk of injury to eyes and damage to hearing, risk of rupturing internal organs!
• Never direct air jet at people.
• Always wear safety goggles/face mask and ear defenders.
Preparatory steps
1.
Remove cylinder head cover (→ Page 158).
2.
164 | Injection Valve / Injector | MS150031/06E 2016-010
TIM-ID: 0000004646 - 008
