Replacing easy-change fuel filter
with the engine running
1.
Cut out the filter to be replaced.
2.
Open the threaded vent plugs at the filter
head of the cut-out filter and make sure
that the fuel filter is not pressurized.
Note:
New version has two threaded vent plugs,
old version has four threaded vent plugs.
3.
Close threaded vent plugs.
4.
Remove cut-out easy-change filter using
the oil filter wrench.
5.
Clean sealing surface on filter head.
6.
Check sealing ring of the new easy-change
filter and coat it with fuel.
7.
Fit SOLAS shield (→ Page 68).
8.
Screw on easy-change filter and tighten by
hand.
9.
Set three-way cock to operating position
(both filters cut in).
10.
Replace further fuel filters in the same way.
92 | Task Description | MS150063/02E 2014-03
TIM-ID: 0000004914 - 005
