MTS Systems Landmark 370 Series, Operation

Page: 78 / 134

Running the Example HCF Test
78 Landmark™ Test System Operation
1. Clamp the specimen in the upper grip.
Using the controls on the MTS Landmark load frame, slowly clamp the specimen in the upper
grip.
2. If necessary , recover from a tripped limit (otherwise proceed to the next step). Clamping can
result in tripping a force or displacement limit. See “If Necessary, Recover from a Tripped
Force Limit” on page 107 or “If Necessary, Recover from a Tripped Displacement Limit” on
page 110.
Check and Reset Meter History
Checking meter history after clamping the specimen in the upper grip allows you to verify that
excessive force was not applied to the specimen during clamping.
1. Check meter history.
Note: Acceptable limits are dependent on the specimen you are using for the test. For
detailed information, consult your lab experts or a materials handbook.