MTS Systems Landmark 370 Series, Operation

Page: 47 / 134

Key Concepts
Landmark™ Test System Operation 47
Concept of the Station Manager Application Creating a Parameter Set
Selecting and Saving Parameter Sets
You select a Parameter Set when you open your Station Configuration. It is a good idea to save your
parameter set periodically during station setup as you make changes in the Station Manager
application.
Concept of a Station Configuration File Paired with a Parameter Set
How MTS Files Work Together
The basic workflow is as follows:
l
You use the Station Manager application to open a Station Configuration.
l
You select a Parameter Set (which includes specific Sensor Calibration files) for your Station
Configuration.
l
You use the Station Manager application to optimize your Station Configuration for the test
you desire to run.
l
While keeping the Station Manager application running, you use the Multipurpose Express
application to select the Test Procedure appropriate for your test.
l
You start the test with the Multipurpose Express application.
l
You create a Test Report with the Multipurpose Express application.
Using MTS Applications and Files to Run Tests