MTS Systems Landmark 370 Series, Operation

Page: 116 / 134

Maintenance
116 Landmark™ Test System Operation
Routine Maintenance Overview Checklist
Calendar Time using 8 hour
Running Time rate per day
Daily Weekly Biweekly Annually
Running Time-Hours 8 40 80 500 1000 1,500 2,000
Check that Actuator Platen Area is
Clean X
1
Monitor Filter Indicators X
Check Hoses/Cables/Connectors X
Check Crosshead/Lifts/Supports X
Check Actuator to be Dry X
Check Hydraulic Service Manifold X
Check Lift Seal Condition to be Dry X
Check Lock Seal Condition to be Dry X
Bionix Lubricate Axial/Torsional
Spline (75-100 hrs) X
Check Actuator X
Label Inspection X
Crosshead/Load Frame
Check Crosshead/Lifts/Supports MTS
2
MTS MTS MTS MTS
Lift Seal Condition is Dry MTS MTS MTS MTS MTS
Lock Seal Condition is Dry MTS MTS MTS MTS MTS
Crosshead Columns are Clean MTS MTS MTS MTS MTS
Column Abrasions are Acceptable MTS MTS MTS MTS MTS
Crosshead Speed is Appropriate MTS MTS MTS MTS MTS
Recommended service to be performed at each running time interval noted
1
Symbol denotes services performed by equipment operators. Most of these procedures involve visual
checks that should not interfere with test system operation. These checks are also completed by
trained field service engineers on each Routine Maintenance visit.
2
Symbol denotes service performed by trained field service engineers as part of an MTS Routine
Maintenance plan. Some of these procedures require special service tools and/or specific service
training to complete.