background image

Temposonics

®

Magnetostrictive, Absolute, Non-contact 

Linear-Position Sensors

M-Series Mobile Hydraulic 

In-Cylinder Sensor

Model MH CAN Safety (SIL 2)

Data Sheet

SENS

O

RS

®

Document Part Number 

551194 Revision B

All specifications are subject to change. Contact MTS for specifications and 
engineering drawings that are critical to your application. Drawings contained 

in this document are for reference only. Go to http://www.mtssensors.com for 
the latest support documentation and related media.

FEATURES

 

Linear, Absolute Measurement in Hydraulic Cylinders

 

Non-Contact Sensing Technology

 

Superior Accuracy, < ± 0.04% F.S.

 

Hysteresis < ± 0.1 mm

 

Repeatability, < ± 0.005% F.S.

 

Compact Design for Embedded Cylinder Applications

 

Direct CAN Safety Output:

 

Displa Velocity

 

Stroke length: 50 mm (2 in.) to 2500 mm (98 in.)

 

Voltage input: 12/24 Vdc

 

Shock Rating: 100 g (single hit) / IEC 68-2-27

 

Vibration Rating 25 g / 10-2000 Hz/IEC 68-2-6

 

200 V/m EMI Immunity

BENEFITS

 

Rugged Mobile Sensor

 

SIL2 Safety Integrity Level

 

CAN Safety (SIL 2) Output

APPLICATIONS

 

Continuous Operation In Harsh Mobile Conditions

 

High Pressure Conditions

 

For Welded and Tie-rod Cylinder Applications

TYPICAL INDUSTRIES

 

Construction

 

Agriculture

 

Off-highway Machinery

Product overview

The M-Series Model MH sensor is designed with the “mobile” world 
in mind.  The Model MH sensor is validated in the field by customers 
worldwide. Performance is second-to-none with high EMI resistance  
of 200 V/m. Ruggedness is “designed in”; 100 g shock and 25 g vibra-
tion rating.  The model MH CAN Safety sensor can be fully sealed and 
embedded in a cylinder to ensure a long operating life.  

The absolute, non-contact Temposonics position sensor with CAN 
Safety reaches a level of 95% for SFF at a fault to ground of 0 for the 
hardware.  Since they are approved for SIL 2 level, they have an aver-
age probability for Failure (PFH) in the range of ≥10

-7

 to <10

-6

 per year.

A SIL Safety manual and direct connection to the Temposonics

®

 

M12x1 connector system and other proven mobile connectors are 
available.

Cylinder Application Example

M-Series Model MH Sensor

Summary of Contents for Temposonics M Series









Reviews: