AquaCafe´
®
r K-‐Cup Installation and Operations Manual
6
Initial Cold & Hot Reservoir Fills
1.
Connect the unit to 120V power outlet. After 10 seconds, the reservoir fill pump
will actuate and the reservoirs will start to fill. It will take approximately 7 minutes
for the reservoirs to fill.
2.
Once the pump stops, place a cup under dispense nozzle and press button #2
(See page 4). The water will dispense from cold reservoir.
3.
Press and hold button #3 for about 1 second (See page 4), and the dispense
button will turn red.
4.
Press the water dispense button and hold until water starts to dispense from the
hot tank.
5.
Once the hot tank has been primed, turn on the hot tank switch that is located on
back of the cooler. Water will reach 186° F within 5 minutes.
