MTN Products Horizons Counter Top, Complete Manual

Page: 8 / 22

Horizons® Counter Top Complete Manual
6
Programming The Horizon® Counter Top Cooler
Continued
•
Press “Setup” button again and Hot-Temp Adjustment will appear on the “LCD”.
Factory default is 88°C (190°F). Adjust range is 82°C (180°F) to 89°C (192°F). Use
the “Up” or “Down” button to select temp if a change is desired.
•
Press “Setup” button again and Temp Ready Indicator will appear on “LCD”. Factory
default is Off. If switched to the On position, the hot (
red ) and cold ( blue ) indicator
lights on the interface panel will flash on and off until preset temperature has been
reached.
Use the “Up” or “Down” button to select “On” or “Off”.
The Temp Ready Indicator is
the final item that requires being set. The “Setup” button must be pressed. Once
pressed it will cycle back to the “Time” setting. After 15 seconds the programing
mode is exited.
•
To revert back to factory settings, simultaneously press the down arrow, Setup, and
up arrow, and wait for a tone (about 1 second), then one long beep (about 3
seconds).
•
The program has a battery backup and there is no need to reprogram if the cooler
experiences a power failure.