Petrol Powered Chainsaws
E&OE
©2017 MTM
7
Operational Safety
•
Do NOT use the machine if the throttle or any safety guard or mechanism is not installed or is not
operating correctly
– have the machine inspected and repaired at an authorised service centre before
using it again.
•
Fully understand how to safely operate the machine and the sawing process to avoid "kick-back". See
Chainsaw Operation.
•
Always hold the machine firmly with both hands during operation. Always use the machine handles.
•
Do NOT use a ladder or tree branches as a platform when using the machine at height
– always use a
stable, flat platform such as a cherry-picker or scissor-lift.
•
Do NOT use the equipment for purposes it is not designed for, such as wood chipping.
•
Before cutting any branch, limb, pruning or cross-cutting, ensure that none of the materials to be cut is
under tension that may be released unexpectedly during cutting.
•
Tree felling should be performed by trained and experienced personnel only. If in any doubt, seek
assistance and advice.
Transportation Safety
•
Always STOP the engine and activate the chain-brake before
putting the machine down, transporting or working on it (refuelling,
adjusting etc).
•
Fit the blade sheath whenever transporting or storing the machine.
•
When walking with the machine, ensure the engine is OFF and the
chain brake is engaged, and the blade sheath is installed. Hold the
machine by the upper handle, with the blade pointing backwards
and the exhaust away from the body.
•
When transporting the machine in a vehicle, ensure the engine is OFF and the chain brake is engaged,
and the blade sheath is installed. Secure the machine in an upright position to prevent tip-over, machine
damage or fuel spills.
