FREEDOM MICRO™ INSTALLATION GUIDE
2
MTI P/N 063-1581-00 rev B ©2014 MTI All Rights Reserved
MTI
1050 NW 229th Avenue Hillsboro, OR 97124 T:800.426.6844 www.mobiletechinc.com
MTI
1
3
2
4
1
2
Uploading Codes to Puck
Uploading Codes to Intellikeys
PROGRAMMING
Connect MCP to the Puck. The MCP beeps once. Puck LED will be
flashing.
Plug key(s) into the IntelliKey port(s) with the MTI logo facing down.
Wait for each key’s LED to turn RED or GREEN.
Press and release the Function button. The MCP beeps once. Wait for
the second confirmation beep. Puck LED will still be flashing, but no
sound will come from the alarm.
IF THE LED IS RED:
Press the Function button on the MCP. The MCP
beeps once and each key’s LED should then turn solid green.
IF THE LED IS GREEN:
The key’s existing code already matches the
current code in the MCP and no further action is required.
Connect the MCP to a Puck or other power supply (USB power supply or
PC USB port). The MCP beeps once when power is applied.
Press
Press
The MCP button may need
to be pressed more than
once to transfer the code.
The key LED may
take up to 6 seconds
to light up.
