above lines after the first quotation marks.
For example:
"siswindv.386" change to " ;device=siswindv.386"
Also, you can run a PIO mode driver after installing a DMA mode driver by
changing the setting "sis_master=on"
into " ;sis_master=on"
or " sis_master=off"
3. After installing the IDE driver, you can turn on the 32-Bit Disk Access and
32-bit File Access(32-Bit File Access only available in Windows for
Workgroups to improve performance.
To change disk access and file access:
a) Enter WINDOWS and choose the "386 Enhance" icon from "Control
Panel"
b) Choose the "Virtual Memory" button
c) Choose the "Change" button
d) Change the appropriate settings
e) Choose the "OK" button
f) In the "Virtual Memory" dialog box, choose the "Yes" button
4. The hard disk cannot work with the CD-ROM on the same channel when
32-Bit File Access is on. You should either install the devices in different
channels or turn the 32-Bit File Access off.
4-4 SiS IDE Driver Installation For Windows 95
1. Put SiS IDE Drivers diskette into the drive.
2. Run the file "setup.exe" under "A:\>IDE\WIN95" directory and follow the
instructions to install the SiS IDE Windows 95 PIO/DMA drivers.
4-5 SiS IDE Driver Installation For Windows NT 3.5x
1. From the Options menu in " ^Windows NT setup," choose "Add /Remove
SCSI Adapters"
2. In the SCSI Adapter Setup dialog box, choose the "Add" button
______________________________________________________________
4-3
【
4
】
________________________________
3. In the " ^Adapter:" list dialog box, choose " ^Other(Requires a disk from a
hardware manufacturer)"
Summary of Contents for R548
Page 60: ...DN 971027 ...
