MTI CONNECT™ HUB PRODUCT MANUAL
2
MTI P/N 063-00210 rev E ©2021 MTI All Rights Reserved
www.mtigs.com | T:800.426.6844
1
3
2
Main Plug of the adapter acts as disconnect
device, the socket-outlet shall be installed near
the equipment and shall be easily accessible.
Warning: The Adapter must IEC/EN/UL 62368-1
certified with output 5 VDC 3A, or provided by MTI;
other specification may cause damage.
La prise principale de l’adaptateur agit comme
un dispositif de déconnexion, la prise de
courant doit être installée près de l’équipement
et doit être facilement accessible.
Avertissement: L’adaptateur doit être certifié IEC/EN/UL
62368-1 avec une sortie 5 VCC 3A, ou fourni par MTI;
d’autres spécifications peuvent causer des dommages.
Install the power supply and power up the Hub. Secure the power supply by wrapping the rubber flap around the connector
and attaching into the opening on top of the Hub.
NOTE: This device requires professional installation to prevent tampering with or removal/replacement of the antenna
by anyone other than qualified service professionals.
OR
If using with MTI Connect application software, Connect the Hub to the internet with an available Ethernet cable or setup
with WIFI credentials. If not using with MTI Connect, move on to Freedom Micro Pairing.
MOUNTING