background image

Introduction                                                           

 

The Mti MB2411H is Mti 2.4GHz Mini PCI Card.    The supporting channel is from 2412GHz to 

2462 GHz as the FCC standard over the 2.4GHz part.    The design is to enhance your 

wireless environment.    The 23dBm/200mW output power will also enhance our product 

strength over the data transmitting and receiving.    You could also use this device to plug into 

the client devices with Mini PCI Slot to enrich your wireless experience. 

                       

 

The following paragraph will descript the Mti MB2411H Mini PCI Card’s feature & benefit, 

system requirement, application, and network configuration. 

 

Feature and Benefit 

 

 

‧ 

Up to 54Mbps high speed data rate 

‧ 

WPA / AES Encryption Security 

‧ 

Operating in High Temperature   

‧ 

Light weight

 

 

System Requirement 

 

The following items are the minimum requirement in order to use the Mini-PCI card. 

 

‧ 

Notebook or other Client Devices containing a 32-bit PCI Slot 

‧ 

Window 98/ME/2000/XP operating system 

‧ 

300 MHz or higher processor 

 

Application   

 

The WLAN products are easy to install and highly efficient.    The following items will state some applications 

could make possible to access the power and flexibility of WLAN: 

 

‧ 

Difficult-To-Wired Environment – Offer the remote Internet Access 

‧ 

Ethernet Network or Another Wireless LAN Backup – To secure some critical 

communication 

‧ 

The Ability For The Real-Time Information Transmitting – Working Places, Hot Spots 

‧ 

Small Office and Home Office network / SOHO -- Easy, Cost-effective and Quick Installation 

‧ 

Campus or Educational Environment – Internet Access for Information or Researching 

       

 

Microelectronics Technology Inc. Proprietary 

Summary of Contents for MB2411H










Reviews: