1
1
3
2
2
CX FLEX
™ SINGLE ALARM ONLY
PRODUCT MANUAL
4
MTI P/N 063-00306 rev 1 ©2019 MTI All Rights Reserved
www.mtigs.com | T:800.426.6844
To silence an alarm, hold the user card over the RFID icon. To disarm after silencing an alarm, hold the user card over the
RFID icon for 5 seconds.
MANAGING ALARMS
1
2
Remove the cable.
Insert a corner of the RFID card into the slot and press
down until the cable ddetaches.
REMERCHANDISING
CABLE REMOVAL
Re-arm by holding user card over
RFID icon or system will auto-arm
after 1 minute. LEDs will be OFF
when the system is armed.
Insert new cable until it clicks.
From an armed state, place the
user key over the RFID icon to
disarm the system. LED will be
flashing red (2 short flashes every
10 seconds). Then remove the
cable. Once the cable is removed,
the LEDs will stop flashing.
click
