1
1
3
2
3
USB-C Sensor:
Insert the other end of the cable into
the device.
Plug the USB-C end of the sensor into the CX Flex until it
clicks.
Flexi-Disc Sensor:
Peel the red film from the VHB
adhesive and press firmly onto the product for 1
minute if the product surface is curved, or 30 seconds
if it is flat.
System will auto-arm after 1 minute, or arm
immediately by holding a whitelisted User Card over
the RFID Icon.
click
2b
2a
CX FLEX
™ SINGLE ALARM ONLY
PRODUCT MANUAL
3
MTI P/N 063-00306 rev 1 ©2019 MTI All Rights Reserved
www.mtigs.com | T:800.426.6844
MERCHANDISING
KEY WHITELIST
Place Authorization Card over the
RFID icon to register to system.
System must be disarmed
to perform this operation.
Place the User Key you want to
add over the RFID icon.
If successful
unit beeps 2 times
Repeat process for all User Keys
until they are successfully added.
To close the whitelist mode, place
the Authorization Card over the
RFID icon. Whitelist mode will end
automatically after 3 minutes of no
use.
