MTI 840 Series, User Manual

Page: 19 / 44

13
13. If applicable, install any
accessories (including the
Hand Control if not previously
installed). See the accessory’s
Instruction Guide for installation
instructions.
14. Verify all functions of the
stretcher bed are operational.
Set the Smart Controller™
Settings for the Home and
Program Buttons. See “Smart
Controller™ Technology” on
page 13 for instructions.
15. Save Home and Program
Buttons’ positions to desired
locations. See “Controls” on
page 15 for programming
instructions.
OPERATION
Operating Conditions
Ambient Temperature +10°C to +40°C (+50°F to +104°F)
Relative Humidity 30% to 75% (non-condensing)
Atmospheric Pressure 700 hPa to 1060 hPa (0.69 atm to 1.05 atm)
Maximum surface temperature of applied part stretcher bed surfaces will not exceed 42°C.
SmartTech™
SmartTech™ is the combination of MTI’s Smart Controller™ and Smart Safety™ technology using a centralized computer controller
that enhances safety, reduces energy consumption, and provides smoother movement, additional memory options, and more user
preferences.
Smart Controller™ Technology
The Smart Controller™ technology is the stack of technology features built into the stretcher bed, allowing the stretcher bed to move
softly and smoothly with soft start/stop technology, a hibernation state to conserve power and a User Program Mode allowing users
to change how some of the buttons function.