Light Replacement Instructions
LED lighting is used for the car’s headlights, destination boards and tail lights. These
small LEDs require a lot less power and generate a lot less heat than incandescent bulbs,
resulting in extremely long life compared to the incandescent bulbs. The LEDs are not
user serviceable.
To replace the interior lights:
1. Follow the shell removal instructions found in the “Lubrication and Greasing”
section of this booklet (page 33).
2. The interior bulbs are of the bayonet variety and can be removed by gently pushing
down on the bulb and twisting clockwise before pulling up and removing from the
socket.
You can obtain replacement parts and instructions from the M.T.H. Parts Department.
Order Online:
www.mthtrains.com,
E-mail:
Fax:
410-423-0009,
Phone:
410-381-2580,
Mail:
7020 Columbia Gateway Drive, Columbia, MD 21046-1532
RailKing PCC Electric Street Car w/ Proto-Sound® 3.0
35
Figure 6
Interior Light
Interior Light
Destination Board
Wire Harness
Headlight
Wire Harness
Tail Light
Wire Harness
Front
Back
