Before the flag is placed on the layout, the flag must be wired together with the activation button, and an AC Transformer
with a minimum output of 9V AC.
In order to connect power to each component, the (3) enclosed wires must be connected to the wiring posts located on the underside of the flag and
the activation button. Follow the diagram to locate the correct wire post terminals for the included wires and activation button. Once the wires are
in place, set the transformer voltage between 9 and 15 volts and turn on the switch to activate the flag. Optimal operation of the flag occurs between
9 and 15 volts.
Wiring Instructions
Strip Z-wire cable harness
insulation to reveal 1/4“ of
bare wire
To AC Transformer
A
C
G
R
O
U
N
D
A
C
