MTHTrains PREMIER GP-30 DIESEL ENGINE Operating Instructions Manual Download | Manualshive

Page: 5 / 24

background image

5

Premier GP-30 Diesel Engine Operating Instructions

Proto-Sound 2.0 Operating Instructions

This manual contains the operating instructions for Proto-Sound 2.0 in
conventional mode only. Instructions for accessing DCS command mode
features accompany the DCS Remote Control System equipment.

Because Proto-Sound 2.0 is an all-new system developed by M.T.H.’s own
research and development team, it operates differently from original
Proto-Sound. Most Proto-Sound 2.0 features are automatically enabled, and the
reset state has been eliminated, so there is no need to program features as with
original Proto-Sound. Although the new system is easier to operate than
original Proto-Sound, you should read these instructions thoroughly before
using Proto-Sound 2.0 features in order to prevent harm to yourself or your
equipment.

Activating Proto-Sound 2.0 Conventional Mode Features:

Proto-Sound 2.0 features are activated by sequences of Bell and Whistle button
pushes described below. Please read the full descriptions of each feature
before using it. To use these buttons to activate features rather than to blow
the whistle or ring the bell, you should press the buttons for a shorter time (1/2
second); you may need to practice your timing to make this work smoothly.

«
...
3
4
5
6
7
...
»

Summary of Contents for PREMIER GP-30 DIESEL ENGINE

























Reviews:

No comments

Related manuals for PREMIER GP-30 DIESEL ENGINE

Brand: H-KING Pages: 20

Brand: H-KING Pages: 12

Brand: Harbor Freight Tools Pages: 7

Brand: Hobbico Pages: 28

Brand: 3D AEROWORKS Pages: 26

Brand: VTech Pages: 16

Brand: Idena Pages: 3

MINI-Z Racer MR-03N HM MINI COOPER S

Brand: Kyosho Pages: 2

Brand: H-KING Pages: 19

Brand: H-KING Pages: 12

Brand: Mega Bloks Pages: 20

Stealth Interceptor ST745

Brand: Himoto Pages: 12

Having a Ball Spin 'n Slide Popper 9176 6WS

Brand: Bright Starts Pages: 12

Brilliant Creations Beginner Laptop

Brand: VTech Pages: 24

First Sink & Stove

Brand: Little Tikes Pages: 2

POST INN 232536

Brand: Faller Pages: 4

Brand: Clas Ohlson Pages: 5

HK-TF2357A-2.4G

Brand: Clas Ohlson Pages: 36

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands