3) To be able to separate the interior from the shell you need to loosen the step
platform from both ends. In order to loosen the step platforms grasp them by the
bottom and pull out from the end about 10
With the step platforms loosened
you can then lower the interior from the shell (to completely remove the body from
the interior, go to Step 6 which is found on page 4). 5) You can now replace the
bulbs by pushing the socket up from the bulb holder and pulling the bulb from its
socket. Replace the middle bulb simply by pulling it from its socket. Replace with
a new one, and reverse the steps to reassemble the caboose. To replace the two
red LED lights at the end of the caboose follow steps 1-7.
°
. 4)
STEP
3
STEP
4
STEP
5
STEP
4
4
STEP
3
3
Step
Platform
Pull Out 10
°
STEP
5
5
Middle Bulb
Extended Vision Caboose Instructions 3
