Bay Window
Caboose Instructions 4
You can obtain replacement bulbs directly from the M.T.H. Parts
Department (phone: 410-381-2580; e-mail: parts@mth-
railking.com; mail: 7020 Columbia Gateway Drive, Columbia MD
21046-1532
STEP
7
7
There will be two spots of hot
glue holding the LEDs in place.
Use a screw driver to loosen
the wires from the spots of glue.
The end windows will also need
to be removed. Simply slide
them out. Pull the LEDs back
towards the inside of the shell
to remove them. Replace the
LEDs with a new set and use
hot glue to put the wires back in
place. Plug the wires back into
the connector under the interior.
When reassembling, the end
posts of the shell must pass
through the corresponding
holes in the interior.
End posts
of the shell
STEP
6
6
Unplug the red LED’s
from underneath the
interior
