
Matrix
®
E-Series Technical Reference Manual 380V – 480V
3
Form: MAE-TRM-E September 2020 REV. 001
2. GENERAL INFORMATION
The purpose of this manual is to aid in the proper installation of the Matrix® E-Series.
For most current product information, please refer to our website:
www.mtecorp.com/products/harmonic-filters/matrix-e-series-harmonic-filter/
This manual is intended for use by personnel experienced in the operation and maintenance of drives.
Because of the high voltages required by the filter, drive and the potential dangers presented by
rotating machinery, it is essential that all personnel involved in the operation and maintenance of this
filter know and practice the necessary safety precautions for this type of equipment. Personnel should
read and understand the instructions contained in this manual before installing, operating or servicing
the filter and drive to which it is connected.
Receipt & Repair Statement
Upon Receipt of this Filter:
The Matrix E-Series Harmonic Filter has been subjected to demanding factory tests before shipment.
Carefully inspect the shipping container for damage that may have occurred in transit. Then unpack the
filter and carefully inspect for any signs of damage. Save the shipping container for future transport of
the filter.
In the event of damage, please contact and file a claim with the freight carrier involved
immediately.
If the equipment is not going to be put into service upon receipt, cover and store the filter in a clean, dry
location. After storage, ensure that the equipment is dry, and that no condensation or dirt has
accumulated on the internal components of the filter before applying power.
Repair/Exchange Procedure
MTE Corporation requires a Return Material Authorization Number and form before we can accept any
filters that qualify for return or repair. If problems or questions arise during installation, setup, or
operation of the filter, please contact MTE for assistance at:
Toll Free: 1-800-455-4MTE (1-800-455-4683)
International Tel: (+1)-262-253-8200
Fax: (+1)-262-253-8222