MTD Jet sweep blower Operator'S Manual Download Page 5

5

S

ection

 2 — i

mportant

 S

afe

 o

peration

 p

racticeS

11. 

According to the Consumer Products Safety Commission 

(CPSC) and the U.S. Environmental Protection Agency (EPA), 

this product has an 

Average Useful Life

 of seven (7) years, 

or 70 hours of operation. At the end of the 

Average Useful 

Life

 have the machine inspected annually by an authorized 

service dealer to ensure that all mechanical and safety 

systems are working properly and not worn excessively. 

Failure to do so can result in accidents, injuries or death.

Spark Arrestor

WARNING! 

This machine is equipped with an 

internal combustion engine and should not be used 

on or near any unimproved forest-covered, brush-

covered or grass-covered land unless the engine’s 

exhaust system is equipped with a spark arrestor 

meeting applicable local or state laws (if any).
If a spark arrestor is used, it should be maintained in 

effective working order by the operator. In the State of California 

the above is required by law (Section 4442 of the California Public 

Resources Code). Other states may have similar laws. Federal laws 

apply on federal lands. 

A spark arrestor for the muffler is available through your 

nearest engine authorized service dealer or contact the service 

department, P.O. Box 361131 Cleveland, Ohio 44136-0019.

WARNING!

 

Your Responsibility—Restrict the use of this power machine to persons who read, understand and 

follow the warnings and instructions in this manual and on the machine. 

SAVE THESE INSTRUCTIONS!

Safety Symbols

This page depicts and describes safety symbols that may appear on this product.  Read, understand, and follow all instructions on the 

machine before attempting to assemble and operate.

Symbol

Description

READ THE OPERATOR’S MANUAL(S)

 

Read, understand, and follow all instructions in the manual(s) before attempting to 

assemble and operate

WARNING— ROTATING BLADES

 

Keep hands out of inlet and discharge openings while  machine is running. There are rotating 

blades inside

BYSTANDERS

 

Do not allow the directional discharge chute to point in the direction of bystanders or pets.

WARNING— SHIELDS AND GUARDS

 

Never operate machine without directional discharge chute and plastic impeller guard 

properly affixed to machine.

Summary of Contents for Jet sweep blower













Reviews: