manualshive.com logo in svg

MTD A0, Operator'S Manual, Page: 9 / 16

Share
Download
MTD A0 Operator'S Manual Download Page 9

Controls & Operation

3

9

Blade Control

Rear Discharge Door

Recoil Starter

Cutting Height 

Adjustment Lever

Cutting Height 

Adjustment 

Lever

Side Discharge 

Chute †

Bail Drive Control †

Mulch Plug †

Grass Catcher †

Deck Wash †

† If Equipped

Single Lever 

Drive Control † 

Electric Starter 

Push Key †

Dual Lever 

Drive 

Controls †

Premium Drive 

Control †

Figure 3-1

Blade Control

The blade control is attached to the upper 

handle of the mower. Depress and squeeze it 

against the upper handle to operate the unit. 

Release it to stop engine and blade.

WARNING: 

The blade control is 

a safety device. Never attempt to 

bypass its operations.

Bail Drive Control (If Equipped)

The bail drive control is located on the 
underside of the upper handle and is used to 
engage the drive. Squeeze it against the upper 
handle to engage the drive; release it to stop 
mower from propelling.

Single Lever Drive Control 

(If Equipped)

The single lever drive control is located on top 
of the upper handle and is used to engage the 
drive. Squeeze it against the upper handle to 
engage the drive; release it to slow down or 
stop mower from propelling.

Dual Lever Drive Controls 

(If Equipped)

The dual lever drive controls are located on top 
of the upper handle and are used to engage 
the drive. Squeeze the right, left, or both right 
and left controls against the upper handle to 
engage the drive; release it/them to slow down 
or stop mower from propelling.

Summary of Contents for A0

















Reviews:

No comments