4
5.2.
Remove the bearing housing screws using a
3/8” socket.
5.3.
Remove the auger bolt on the right side of the
housing using a 7/16” socket and ratchet.
5.4.
Using a drift punch or 3/8” 6” extension tap on
the end of the auger shaft from the right side,
driving the axle shaft out of the right hand bear-
ing and thereby pushing out the bearing and
bearing backup washer out the left side.
The auger can now be inspected for wear and or
breakage of welds. If not damaged, replace in reverse
order.
6.
SHROUD COVER REMOVAL
6.1.
Remove the upper chute and the chute handle
from the lower chute.
Bearing Housing Cover
LEFT SIDE
RIDE SIDE
Auger Bolt
Slider the auger to left pushes out bearing
