7
FIGURE 7.
3/8" Jam
Nut
Refer to figure 9
for connector
wiring details
Flat Male
Connector
YELLOW Right Turn Signal/Stoplight
Black Wire
With Ring
Terminal
Conduit
Connectors
Right Side
BROWN Taillight
GREEN Left Turn Signal/Stoplight
WHITE Ground
Black Wire
With Ring
Terminal
License
Plate
Side
Left Side
15. Attach the yellow reflex reflectors to a clean
surface on the beam of the log splitter as far
forward as possible on each side. See figure 8.
FIGURE 8.
Reflectors
(Both
Sides)
16. A four wire flat female connector must be installed
on your towing vehicle in order to plug in the wir-
ing harness from the log splitter. See figure 9.
(Use NAPA part number 784642 18" flat female
connector or similar part that can be purchased
from a local automotive parts store.)
FIGURE 9.
Flat Female
Connector—
Towing Vehicle
Flat Male
Connector—
Log Splitter
Brown
White
Green
Yellow
Brown
White
Green
Yellow
17. Crimping type connectors similar to the one
shown in figure 6 can be purchased that can be
used to attach the wires from the towing vehicle’s
wiring harness to the log splitter’s wiring harness.
IMPORTANT:
Before towing the log splitter, check the
operation of all lights (taillights, stoplight and both turn
signals).
NAPA Part No.
784642
