MTD 190-181 Operator'S Manual Download Page 2

2

TABLE OF CONTENTS

Content

Page

Important Safe Operation Practices................................................................... 3

Loose Parts ....................................................................................................... 6

Assembly........................................................................................................... 7

Operation .......................................................................................................... 10

Parts List............................................................................................................ 11

Warranty............................................................................................................ 12

FINDING MODEL NUMBER

This Operator’s Manual is an important part of your new lawn tractor. It will help you assemble, prepare and 
maintain the unit for best performance. Please read and understand what it says. 

Before you start assembling your new equipment

, please locate the model plate on the 

equipment and copy the information from it in the space provided below. The information on the 
model plate is very important if you need help from our Customer Support Department or an 
authorized dealer. 

You can locate the model number in the front, left portion of the plastic grass catcher cover. A sample 
model plate is explained below. For future reference, please copy model number and serial number of 
the tractor accessoryin the space below.

CALLING CUSTOMER SUPPORT

If you have difficulty assembling this product or have any questions regarding the controls, operation or 
maintenance of this unit, please call the Customer Support Department. 

Call 

1- (330) 220-4MTD

 (4683) or 

1- (800)-800-7310 

to reach a Customer Support representative. 

Please have your unit’s model number and serial number ready when you call. See previous 
section to locate this information. You will be asked to enter the serial number in order to process 
your call.

Copy the model number here:

Copy the serial number here:

For more details about your unit, visit our website at www.mtdproducts.com

 

              

Summary of Contents for 190-181













Reviews: