DE
ACHTUNG!
Obwohl das Gerät in Hinblick auf Sicherheit
entworfen wurde und über Schutzmechanismen
sowie zusätzlicher Sicherheitselemente verfügt,
besteht bei der Bedienung eine geringe Unfall-
oder Verletzungsgefahr. Es wird empfohlen, bei der
Nutzung Vorsicht und Vernunft walten zu lassen.
m) Während der Arbeit die Messer nicht anfassen.
n)
Während dem Halten des Werkstücks die Hände nicht
näher als 20 cm von den Messern des Geräts halten.
The terms "device" or "product" are used in the warnings
and instructions to refer to LAMINATE FLOOR CUTTER.
SAFETY IN THE WORKPLACE
a)
Make sure the workplace is clean and well lit. A messy
or poorly lit workplace may lead to accidents. Try
to think ahead, observe what is going on and use
common sense when working with the device.
b)
If you are unsure about whether the product is
operating correctly or if you find damage, please
contact the manufacturer’s service centre.
c)
Only the manufacturer’s service centre may make
repairs to the product. Do not attempt to make
repairs yourself!
d)
Children or unauthorised persons are forbidden to
enter a work station. (A distraction may result in loss
of control over the device).
e)
Please keep this manual available for future reference.
If this device is passed on to a third party, the manual
must be passed on with it.
f)
Keep packaging elements and small assembly parts in
a place not available to children.
g)
Keep the device away from children and animals.
h)
If this device is used together with another
equipment, the remaining instructions for use shall
also be followed.
LEGEND
EN
U S E R M A N U A L
PERSONAL SAFETY
a)
Do not use the device when tired, ill or under the
influence of alcohol, narcotics or medication which
can significantly impair the ability to operate the
device.
b)
The device is not designed to be handled by persons
(including children) with limited mental and sensory
functions or persons lacking relevant experience and/
or knowledge unless they are supervised by a person
responsible for their safety or they have received
instruction on how to operate the device.
c)
When working with the device, use common sense
and stay alert. Temporary loss of concentration while
using the device may lead to serious injuries.
ATTENTION!
Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury or even death.
REMEMBER!
When using the device, protect
children and other bystanders.
Read instructions before use.
WARNING! or CAUTION! or REMEMBER!
Applicable to the given situation (general
warning sign).
Wear protective goggles.
Wear protective gloves.
CAUTION! Sharp elements. Limb cut hazard.
ATTENTION! Hand crush hazard!
d)
Use personal protective equipment as required
for working with the device, specified in section 1
(Legend).
The use of correct and approved personal protective
equipment reduces the risk of injury.
e)
Do not overestimate your abilities. When using the
device, keep your balance and remain stable at all
times. This will ensure better control over the device
in unexpected situations.
f)
Do not wear loose clothing or jewellery. Keep hair,
clothes and gloves away from moving parts. Loose
clothing, jewellery or long hair may get caught in
moving parts.
g)
The device is not a toy. Children must be supervised to
ensure that they do not play with the device.
h)
The material to be worked should be free of impurities.
i)
Do not touch any movable parts or accessories during
device operation.
SAFE DEVICE USE
a)
Do not overload the device. Use the appropriate tools
for the given task. A correctly-selected device will
perform the task for which it was designed better and
in a safer manner.
b)
When not in use, store in a safe place, away from
children and people not familiar with the device who
have not read the user manual. The device may pose
a hazard in the hands of inexperienced users.
c)
Keep the device in perfect technical condition. Before
each use check for general damage and especially
check for cracked parts or elements and for any other
conditions which may impact the safe operation of the
device. If damage is discovered, hand over the device
for repair before use.
d)
Keep the device out of the reach of children.
e)
Device repair or maintenance should be carried out by
qualified persons, only using original spare parts. This
will ensure safe use.
f)
To ensure the operational integrity of the device, do
not remove factory-fitted guards and do not loosen
any screws.
g)
Do not work on two workpieces at the same time.
h)
The device is not a toy. Cleaning and maintenance may
not be carried out by children without supervision by
an adult person.
i)
It is forbidden to interfere with the structure of
the device in order to change its parameters or
construction.
j)
Do not overload the device.
k)
Long workpieces must be supported and set stably for
working.
l)
The workpiece shall always be level and perpendicular
to the device cutters.
m) Do not touch the cutters during device operation.
n)
Do not bring your hand closer than 20 cm to the
device cutters when holding the workpiece.
ATTENTION!
Despite the safe design of the device
and its protective features, and despite the use of
additional elements protecting the operator, there is
still a slight risk of accident or injury when using the
device. Stay alert and use common sense when using
the device.
4
Rev. 13.06.2022
5
Rev. 13.06.2022