and persons of impaired mental, sensory and intellectual functions. The work area
of the unit should provide immediate access to the power switch.
ASSEMBLY OF THE UNIT
The unit is a free-standing unit. Before use, connect hoses with adapters for the
water
inlet end (O) and outlet end (D).
Place a filter (P) on the end of the water intake hose.
IMPORTANT: Do not operate pump without the water filter.
Secure the hoses at the ends with the included worm clamps. Secure the water filter
at the end of the suction hose in the same way.
Hose lengths must not exceed the specified parameters.
IMPORTANT: the pump has its greatest capacity when placed as close as possible to
the intake water tank.
Next, top up the oil in the engine - to do this, unscrew the oil plug and pour engine
oil through it until its level reaches the appropriate field on the plug's dipstick -
preferably close to the maximum allowable level.
Check the oil level by screwing/inserting the plug with the dipstick wiped dry into
the engine and after a few seconds unscrewing it again and checking to what level
the accumulated oil on the dipstick reaches.
IMPORTANT: Always check the engine oil level with the engine off and cold or
cooled.
Do not overfill the engine oil - it can damage the engine!
If the oil level exceeds the permissible level, suck out the excess oil.
