16
Press <Speed> 80Km/h, then <Frequency 5>, then the <F> key until the number 14
appears in the middle square under the playing field, then please press <Horizontal>
three times and then <Start>.
How do I make the ball land on the center of the baseline?
Press the ON/OFF button, then the black dot will land on the T-line.
You cannot press the black dot on the remote control display on the baseline. But if
you press the north arrow above the F key while the machine is running, you will see
the two throwing wheels move up. Nothing will happen on the remote control display.
This means that the ball flies higher and higher over the net and hits at a certain
height setting, which can be read in the middle rectangle on the remote control. The
ball flies continuously higher and higher and you can decide for yourself when the
ball should hit the middle of the base line.
For example: if the middle rectangle shows 40, then you have a loop setting.
You can also achieve the effect that the ball should land in the middle of the baseline
in another way, namely via the self-programming button.
Press the Program ON key (not the Start/Stop key, which remains in OFF mode) for
three seconds until a black dot starts flashing in the left corner.