User’s Manual
DIN-POE1-(G)
MSTRONIC CO., LTD.
3
*Data Input
The left RJ45 ports 1-4 on the front panel are used for Ethernet data input. The model is a midspan,
without Ethernet switch functionality. Each data port is independent.
All four ports with surge protection.
*Power Input
The 7 pin green terminal on the top panel is used for power input wiring, it can be connected to the
two DC sources as back up, and the higher voltage source will become the main source The input
voltage range of the model is 5VDC to 30VDC.
*PoE Output
The right RJ45 ports 1-4 on the front panel are used for PoE output. Each port can deliver a
different voltage. The Adj1~Adj4 on the top panel are used to adjust the output voltage of port 1~4
(the same as Vo1~Vo4). Each port can be regulated between 2.3VDC to 24VDC with individual
setting.
* Data pair A on line 1 and 2
* Data pair B on line 3 and 6
* Data pair C plus V+ on line 4 and 5
* Data pair D plus V- on line 7 and 8
