WRN wireless repeater node
MST
Owner’s Manual
Revision 1.7
– 26 April 2018
© Mine Site Technologies Pty Ltd 2017
Commercial in Confidence
18
Battery Replacement and Charging
Charging
When you receive your batteries - they will be asleep. Place the batteries on the charger until
they indicate full charge. Full charge indication is when the ramping / flashing stops and all
LEDs are solid.
If you are charging a battery for the first time, it may time out and show an error where the LEDs
flash between two green LEDs and the outer red LEDs. Simply remove from the charger, to
reset the timers, and reconnect, they will then continue to full charge.
Charger green = ON
Red = Charging
Lachlan wheel
The Lachlan wheel (1) is an MST patented battery retention/ rejection mechanism.
To release a battery - push the red button (2) and turn the wheel towards the button and the
battery will disengage. Pull the battery out - the wheel will relax to a receive position ready for
the next battery. To insert the battery simply slide it into position ensuring engagement with the
wheel.
2
1
2
