USER MANUAL V2.0 | Updated 01-Aug-2017
13
GETTING STARTED
Install the machine on your conveyor according to the installation instructions. See the Quick Start
Guide for more information.
Set print direction and appropriate throw distance to obtain best print quality (1-3 mm).
Insert ink cartridge.
Plug the power cord into an appropriate power source to start up the machine.
The printer need PE (Protective earthing conductor) connection before use.
EXTERNAL DEVICES CONNECTIONS
NOTES:
Machine is able to operate with External Sensor, Encoder, Alarm at a time. Consult your supplier
for further supports on the settings and connections.
To connect m
achine with External Sensor, Encoder, Alarm, etc…, additional connector DB15
(male) will be required.
EXTERNAL SENSOR
Machine supports NPN, PNP and Push-pull sensor types.
Connect sensor using power supply on machine
24VDC
.
Connect sensor to machine using external power supply. Below demonstration is for external
power supply of
5VDC
.
