2016 Premium MSpa Service Manual
Visit us at: www.the-mspa.com
- 29 -
Answer: The spa can be Inflated until it becomes stable with approx.85% capacity only. An over inflated spa may
burst or suffer from leaks in the seam while it’s filled with water and heated by the sunshine in hot
summer. Always remember to use manometer to test and adjust the air pressure of the spa pool to a
suitable status (make sure the air pressure indicating needle stay within the green sector after filling the
water). When the spa needs to inflate more air during use, please also make sure the air pressure
indicating needle reads in green sector at any time.
Part Eight. Maintance on the Mspa Pool
8.1.
Question: Does the spa pool require any special care to ensure durability?
Answer: Keep sharp objects out of the spa pool or from underneath of the spa pool. Maintain proper PH level of
water and keep the spa sanitary and clean.
8.2.
Question: How do I prevent dirt and grime from getting into the spa water?
Answer: Use the top lid to keep your spa covered when not in use. This will help keep wind and other elements
from depositing dirt and debris in your spa, and will also prevent excess rainwater from overfilling your
spa.
8.3:
Question: How often should I wash or change the filter cartridge?
Answer: It depends on both how often the customer uses the spa and how the water quality is. Filter cartridge can
be rinsed by the hose after it has been working for 1-2 weeks. If the filter cartridge remains to be soiled
and discolored, the filter cartridge should then be replaced.
8.4.
Question: How can I dry the spa pool before storage?
Answer: After the spa is drained, operate the bubble function for another 20 or 30 minutes to dry the bottom ring.
Remove the control panel from the spa tub, disassemble filter pump from the bottom of control box so as
shown in the video. Drain water and clean off any scale incrustation, like white coagulations inside the
filter pump. Unscrew the complete part of the air valve on the spa pool and the spa will be deflated
8.5.
Question: What should the customer use to clean his spa before storing it for the winter?
Answer: The customer can use mild soap and water to wash his spa. He shall wash the spa thoroughly and make
sure the spa is completely dry before storing.
8.6.
Question: How many seasons should the spa last?
Answer: It depends on how the consumer uses, maintains and cares the spa. Regular maintenance and proper
storage of the spa in the off-season will prolong its life. Warranty on the spa liner is maximum
12
months
from the date of purchase.
8.7.
Question: Is there repair material enclosed for spa liner repair?
Answer: Yes, but only a few pieces of repair PVC swatches are included in the package. For safety reason, the
repairing glue is not included to the package. But consumers can ask for the glues from the service
center or can try to find a similar glue used for PVC gluing for such repair at their local shops. Small tears
or holes can be repaired with the enclosed repair PVC swatches. The surface should be dry and clean
while affixing the PVC swatch to the leaking tiny holes or tears.
8.8.
Question: How often to test the spa water?
Answer: Spa water should be tested each time before using the spa. Take an easy test with the pH test strip to
check alkalinity, chlorine or bromine level of water. Keep the pH level and alkalinity in a proper range,
this also helps to extend the product life of filter pump and heater.
8.9.
Question: How long will my MSpa last?
Answer: If looked after, your MSpa should last for years.
The blower of bubble has a lifetime. MSpa blower is Quieter & more durable than like product for > 200
Hours – equal to 600 time of use.
For your health concern, MSpa has the auto break design, sets the bubble function for every 20 minutes
and auto stop for 10 minutes break. Soaking in the 40°C MSpa for 20 minutes, you can burn about 200
calories, which equals to:
