12
SPA SET-UP
Move the entire package to the selected site. Open the carton carefully as it can be used to store the spa
during long term storage or when not in use.
Lay out all the parts on the ground and make sure all parts are accounted for. Make sure the spa tube is
right side up. (*For missing or damaged part, contact the MSpa Service Center)
Spread the Heat Preservation Ground Mat over a cleared area. Spread out the spa liner over the ground
mat. Heat Preservation Mat prevents heat loss from the bottom of the unit.
1.
2.
3.
1
2
3
Connect the singal line.
Find the
singal line, loose the cap on the
end, and plug into the line, port on
the control panel. Once the line is
connected properly, the backlight
of the buttons area will light up on
the panel.
4.
4
O-rings
Air pipe
Connect the control panel to the spa tub. Fasten and
secure the rings to the pipe adapter on the spa tub.
(Fig.4)
Make sure the rubber O-rings are properly placed
on the air pipes.
CAUTION:
Lost of the O-rings may result spa and the
bubbling function working improperly, and also cause the
air pump rusted.
NOTE:
For spa models has PVC leather covers, make
sure the spa cover is onto the spa tub properly before
connecting the control panel. The two holes on the
leather cover must be positioned correctly to the pipes of
control panel air pipes.
5.
5
NOTE:
Soho M-029S:
Spread out
the square ground mat and
place it to the selected site.
Make sure the buckle of
cover and mat is attached
when spa not in use.
this side
face down
Summary of Contents for Birkin M-123S
Page 26: ......
