6
4 . Finally, press the “RESET” button again. The indicator light should turn red. The spa is ready for use.
(4)
C. Assembly
b)
Screw the control panel onto the spa, fasten the ring to the pipe adaptor.
c)
Connect the connectors. Make sure that the “ ” mark of each connector are properly matched
together.
d)
Open the air valve under the control panel. Screw one end of inflation hose onto it.
e)
Open the air valve on the Spa. Connect the other end of inflation hose into the valve.
(1)
(2)
(3)
(4)
(b)
(c)
(d)
a)
Unfold the Spa pool from the packaging.
Spread the Spa and cover. Make sure
both are right side up.
For B-130 and B-140 only
Put the side leather cover on the spa tub.
Attention: make sure the 2 holes on the leather
fit the right positions of spa tub.
(a)
