MSI z75a-g45 series User Manual Download Page 56

Page: 56 / 88

2-14

BIOS Setup

Spread Spectrum

Ths functon reduces the EMI (Electromagnetc Interference) generated by modulatng

clock generator pulses.

Important

If you do not have any EMI problem, leave the settng at [Dsabled] for optmal system

stablty and performance. But f you are plagued by EMI, select the value of Spread

Spectrum for EMI reducton.
The greater the Spread Spectrum value s, the greater the EMI s reduced, and the

system wll become less stable. For the most sutable Spread Spectrum value, please

consult your local EMI regulaton.
Remember to dsable Spread Spectrum f you are overclockng because even a slght

jtter can ntroduce a temporary boost n clock speed whch may just cause your over-

clocked processor to lock up.

Vdroop Control

Ths tem s used to select the VDroop control mode.

CPU Core OCP Expander

Ths tem s used to expand the lmtaton of CPU Over Current Protecton. The hgher

expandng value ndcates less CPU protecton. So please adjust the CPU voltage

carefully f needed.

CPU Core Engne Speed

Ths tem allows you to ncrease the PWM workng speed to stablze CPU Core voltage

and mnmze rpple range. Increasng the PWM workng speed wll cause hgher

temperture of MOSFET. So please make sure a coolng soluton s well-prepared for

MOSFET before you ncrease the value.

CPU Core Voltage/ DRAM Voltage/ GPU Voltage/ System Agent Voltage (SA)/ CPU

PLL Voltage/ DDR_VREF_CA_A/ DDR_VREF_CA_B/ DDR_VREF_DA_A/ DDR_VREF_

DA_B/ PCH 1.05

These tems are used to adjust the voltage of CPU, Memory, GPU and chpset.

Current CPU Core Voltage/ Current CPU I/O Core Voltage/ Current DRAM Voltage/

Current GPU Voltage

These tems show current CPU/ CPU I/O/ DRAM/ GPU voltage. Read-only.

Overclockng Profiles

Press <Enter> to enter the sub-menu.

Overclockng Profile 1/ 2/ 3/ 4/ 5/ 6

Press <Enter> to enter the sub-menu.

Set Name for Overclockng Profile 1/ 2/ 3/ 4/ 5/ 6

Gve a name by typng n ths tem.

Save Overclockng Profile 1/ 2/ 3/ 4/ 5/ 6

Save the current overclockng settngs to ROM for selected profile.

Load/ Clear Overclockng Profile 1/ 2/ 3/ 4/ 5/ 6

Load/ Clear the stored profile settngs from ROM.

▶

•

▶

Summary of Contents for z75a-g45 series

























































































Search results

Summary of Contents for z75a-g45 series

Reviews:

Related manuals for z75a-g45 series

Brands by name

Popular brands

MSI z75a-g45 series, User Manual

Search results

Summary of Contents for z75a-g45 series

Reviews:

Related manuals for z75a-g45 series

Brands by name

Popular brands