MSI X299 SLI PLUS, Manual, Page: 68 / 109

68
BIOS Setup
f
DRAM Frequency [Auto]
Sets the DRAM frequency. Please note the overclocking behavior is not guaranteed.
f
Adjusted DRAM Frequency
Shows the adjusted DRAM frequency. Read-only.
f
DRAM Timing Mode [Link]
Selects the memory timing mode.
[Link]
Allows user to configure the DRAM timing for all memory channel.
[UnLink] Allows user to configure the DRAM timing for respective memory
channel.
f
Advanced DRAM Configuration
Press Enter to enter the sub-menu. User can set the memory timing for each/ all
memory channel. The system may become un-stable or un-bootable after changing
memory timing. If it occurs, please clear the CMOS data and restore the default
settings. (Refer to the Clear CMOS jumper/ button section to clear the CMOS data, and
enter the BIOS to load the default settings.)
f
Memory Fast Boot [Auto]*
Enables or disables the initiation and training for memory every booting.
[Auto]
The setting will be configured automatically by BIOS.
[Enabled] System will completely keep the archives of first intiation and training
for memory. So the memory will not be initialed and trained when
booting to accelerate the system booting time.
[Disabled] The memory will be initialed and trained every booting.
f
DigitALL Power
Press Enter to enter the sub-menu. Controls the digital powers related to CPU PWM.
f
SVID Communication [Auto]*
Enables or disables SVID (Serial Voltage Identification) support.
[Auto]
This setting will be configured automatically by BIOS.
[Enabled] PWM phase will be changed dynamically according to the CPU SVID
(Serial Voltage Identification).
[Disabled] Disables SVID (Serial Voltage Identification) support.
f
VCCIN Voltage [Auto]
Sets the CPU input voltage. The CPU input voltage is the CPU power source that is
shared with components of the CPU.
f
CPU Voltages control [Auto]
These options allows you to set the voltages related to CPU. If set to Auto , BIOS will
set these voltages automatically or you can set it manually.
f
DRAM Voltages control [Auto]
These options allows you to set the voltages related to memory. If set to Auto , BIOS
will set these voltages automatically or you can set it manually.
f
PCH Voltages control [Auto] (optional)
These options allows you to set the voltages related to PCH. If set to Auto , BIOS will
set these voltages automatically or you can set it manually.