background image

27

Safety Instructions

Safety Instructions

 

Read the safety instructions carefully and thoroughly.

 

All cautions and warnings on the device or User Guide should be noted.

 

Refer servicing to qualified personnel only.

Power

 

Make sure that the power voltage is within its safety range and has been adjusted 

properly to the value of 100~240V before connecting the device to the power outlet. 

 

If the power cord comes with a 3-pin plug, do not disable the protective earth pin 

from the plug. The device must be connected to an earthed mains socket-outlet.

 

Please confirm the power distribution system in the installation site shall provide 

the circuit breaker rated 120/240V, 20A (maximum).

 

Always disconnect the power cord or switch the wall socket off if the device would be 

left unused for a certain time to achieve zero energy consumption.

 

Place the power cord in a way that people are unlikely to step on it. Do not place 

anything on the power cord.

 

If this device comes with an adapter, use only the MSI provided AC adapter approved 

for use with this device.

Battery

Please take special precautions if this device comes with a battery.

 

Danger of explosion if battery is incorrectly replaced. Replace only with the same or 

equivalent type recommended by the manufacturer.

 

Avoid disposal of a battery into fire or a hot oven, or mechanically crushing or cutting 

of a battery, which can result in an explosion.

 

Avoid leaving a battery in an extremely high temperature or extremely low air 

pressure environment that can result in an explosion or the leakage of flammable 

liquid or gas.

 

Do not ingest battery. If the coin/button cell battery is swallowed, it can cause 

severe internal burns and can lead to death. Keep new and used batteries away from 

children.

European Union:

Batteries, battery packs, and accumulators should not be disposed of as 

unsorted household waste. Please use the public collection system to 

return, recycle, or treat them in compliance with the local regulations.

Taiwan:

廢電池請回收

 

For better environmental protection, waste batteries should be collected 

separately for recycling or special disposal.

Summary of Contents for Summit MS321UP

































Reviews: