5 2
3.
The exact screen shall vary depending on the model of wire-
less card you have at hand; however, any of the utilities shall
have a list of
”
Site Surveys
”
or
“
Available Networks
”
. Site Sur-
veys
”
or
“
Available Networks
”
are available wireless networks
you are able to connect to.
Installation CD-ROM does not start Setup Utility
?
If the CD-ROM does not start the Setup Utility automatically, one
of the possible reasons might be system is running other ap-
plications that are interferring with the CD drive.
If the Setup Utility does not appear within 15-20 seconds, click
Start
at the taskbar and select
Run...
. Type
E:\setup.exe
(where
E
is your CD-drive) in the Open box and click
OK
to launch the
Setup program manually.
Power LED does not ON; Card is not working
If the LED indicators are not ON, the problem might be that the
card is not connected or is not properly installed.
Verify that the card is plugged firmly into the PCI slot of your
computer. Check to see that the necessory drivers for the card
have been installed. Right click on the
My Computer
icon on
your desktop. Chosse
Propertie
s and navigate to the
Device
Manager
and see if your PCI card is listed without any errors.
Please contact us for any errors.
Data transfering is slow sometimes.
Wireless Technologh is radio-based, which means connectiv-
ity and the throughput performance between devices decrease
when the distance between devices increases. Other possible
factors that cause signal degradation are obstructions such as
walls and applicances made of metal. Consequently, the typi-
cal indoor range of your wireless devices will be between 100
to 200 feet of range. Note that connection speed may decrease
as you move further from the wireless router or access point.
Q2
Q3
Q4
