MSI N0Q1, User Manual, Page: 25 / 28

3-2 3-3
User's Manual
How to Manage Power Supply
This section provides users basic safety precautions to take when using an AC/DC adapter
and battery power properly.
AC/DC Adapter
Ensure that your notebook is connected to an AC power source via the AC adapter before
turning it on for the first time. If the notebook automatically shuts down due to low battery
power, it is likely to cause system failure. Below are some Dos and Don'ts of an AC/DC
adapter.
▶ Dos
• Use the adapter that shipped with your notebook only.
• Always be aware of heat coming from the in use AC/DC adapter.
• Unplug the AC power cord before disassembly the notebook.
▶ Don'ts
• Cover an in-use adapter since it can generate heat.
• Have the AC power cord plugged after powering off the system when the
notebook is going to be left unused for a longer time.
1. Take up the interchangeable plug and look for the groove on the interchangeable
plug which can be used for locking on the AC/DC adapter. Then align the groove
of the interchangeable plug on the tenon of the AC/DC adapter with correct
orientation. Next, rotate the interchangeable plug 90 degrees clockwise until it is
fixed on the AC/DC adapter.
2. Plug the DC end of the AC/DC adapter into the DC-in jack of the Tablet PC.
3. Then plug the AC/DC adapter into the power outlet.
4. When remove, please follow the steps 3
,
2, 1.
▶ NOTE: The interchangeable plug may vary depending on countries or regions.