MSI MS-S0081, Manual

Page: 42 / 54

3-8
BIOS Setup MS-S0081 BIOS Setup MS-S0081
Launch PXE OpROM
Use these settngs to enable/dsable boot opton ROM for legacy network de-
vces.
Chassis Intrusion
Ths settng enables/dsables the feature of recordng the chasss ntruson
status and ssung a warnng message f the chasss s once opened. To clear
the warning message, set the field to [Reset]. The setting of the field will auto -
matically return to [Enable] later.
Disable SCU Devices
Ths settng enables/dsables SCU devces.
Onboard SAS OpROM
Ths settng enables/dsables the SAS opton ROM.
Onboard SATA RAID OpROM
Ths settng enables/dsables the SATA RAID opton ROM.
Power Management Configuration
ACPI Sleep State
This setting specifies the power saving modes for ACPI function. If your oper -
atng system supports ACPI, you can choose to enter the Standby mode n S1
fashion through the setting of this field.
Restore AC Power Loss
This setting specifies whether your system will reboot after a power failure or
nterrupt occurs. Avalable settngs are:
[Power Off] Leaves the computer in the power off state.
[Power On] Leaves the computer in the power on state.
[Last State] Restores the system to the previous status before power
falure or nterrupt occurred.
Wake System with Fixed Time
When [Enabled], your can set the date and time at which the RTC (real-time
clock) alarm awakens the system from suspend mode.
▶
▶
▶
▶
▶
▶
▶
▶
▶