MSI MS-9A78B1, Manual, Page: 43 / 54

3-16
BIOS Setup MS-9A78B1
Power
▶ Restore AC Power Loss
This setting specifies whether your system will reboot after a power failure or
interrupt occurs. Available settings are:
[Power Off] Leaves the computer in the power off state.
[Power On] Leaves the computer in the power on state.
[Last State] Restores the system to the previous status before
power failure or interrupt occurred.
▶ Deep S5
The setting enables/disables the Deep S5 power saving mode. Deep S5 is
almost the same as G3 Mechanical Off, except that the PSU still supplies power,
at a minimum, to the power button to allow return to S0. A full reboot is required.
No previous content is retained. Other components may remain powered so the
computer can “wake” on input from the keyboard, clock, modem, LAN, or USB
device.
▶ Advanced Resume Events Control
▶ PCIE/PCI PME
This field specifies whether the system will be awakened from power saving
modes when activity or input signal of onboard PCIE/ PCI PME is detected.
▶ USB from S3/S4
The item allows the activity of the USB device to wake up the system from S3/
S4 sleep state.
▶ RTC
When [Enabled], your can set the date and time at which the RTC (real-time
clock) alarm awakens the system from suspend mode.