MSI MS-9A65, User Manual

Page: 40 / 49

3-17
BIOS Setup MS-9A65
Power
▶ Restore AC Power Loss
This setting specifies whether your system will reboot after a power failure or
interrupt occurs. Available settings are:
[Power Off] Leaves the computer in the power off state.
[Power On] Leaves the computer in the power on state.
[Last State] Restores the system to the previous status
before power failure or interrupt occurred.
▶ Deep S5
The setting enables/disables the Deep S5 power saving mode. S5 is almost
the same as G3 Mechanical Off, except that the PSU still supplies power, at
a minimum, to the power button to allow return to S0. A full reboot is required.
No previous content is retained. Other components may remain powered so the
computer can “wake” on input from the keyboard, clock, modem, LAN, or USB
device.
Advanced Resume Events Control
▶
PCIE PME
This field specifies whether the system will be awakened from power saving
modes when activity or input signal of onboard PCIE PME is detected.
▶
USB from S3/S4
The item allows the activity of the USB device to wake up the system from S3/
S4 sleep state.
▶ RTC
When [Enabled], your can set the date and time at which the RTC (real-time
clock) alarm awakens the system from suspend mode.