MSI MS-98C7 Manual Download Page 52

Page: 52 / 54

3-20

BIOS Setup

MS-98C7

BIOS Setup

MS-98C7

Power

ACPI Sleep State

This item specifies the power saving modes for ACPI function. If your operating

system supports ACPI, you can choose to enter the Standby mode n S1 (POS)

or S3 (STR) fashion through the setting of this field.

Restore AC Power Loss

This setting specifies whether your system will reboot after a power failure or

nterrupt occurs. Avalable settngs are:

[Power Off] Leaves the computer n the power off state.
[Power On] Leaves the computer n the power on state.
[Last State] Restores the system to the prevous status

before power falure or nterrupt occurred.

Deep S5

The settng enables/dsables the Deep S5 power savng mode. S5 s almost

the same as G3 Mechancal Off, except that the PSU stll supples power, at

a mnmum, to the power button to allow return to S0. A full reboot s requred.

No prevous content s retaned. Other components may reman powered so the

computer can “wake” on nput from the keyboard, clock, modem, LAN, or USB

devce.

▶

Summary of Contents for MS-98C7























































Search results

Summary of Contents for MS-98C7

Reviews:

Related manuals for MS-98C7

Brands by name

Popular brands

MSI MS-98C7, Manual

Search results

Summary of Contents for MS-98C7

Reviews:

Related manuals for MS-98C7

Brands by name

Popular brands