MSI MS-9272, User Manual, Page: 59 / 120

3-6
M S-9272 Server
[Type] Press PgUp/<+> or PgDn/<-> to select
[Manual], [None] or [Auto] type. Note that the
specifications of your drive must match with
the drive table. The hard disk will not work
properly if you enter improper information for
this category. If your hard disk drive type is
not matched or listed, you can use [Manual] to
define your own drive type manually.
[Multi-Sector Transfers] Any selection except Disabled determines
the number of sectors transferred per block
[LBA Mode Control] Enabling LBA causes Logical Block Ad-
dressing to be used in place of Cylinders,
Heads and Sectors
[32-Bit I/O] Enables 32-bit communication between
CPU and IDE card
[Tranfer Mode] Selects the method for transferring the data
between the hard disk and system memory
[Ultra DMA Mode] Indicates the type of Ultra DMA
Boot Features
The sub-menu is used to configure system boot-up features.
Boot-time Diagnostic Screen
Select [Enabled] if you want to view the system diagnostic screen during boot-
time.
QuickBoot M ode
Setting the item to [Enabled] allows the system to boot within 5 seconds since
it will skip some check items.
Extended M emory Testing
This setting determines which type of tests will be performed on extended
memory (above 1M).
System M emory/ Extended M emory
These items show the memory status of the system. (Read-only)